Egan Standing Rigging is an all-new architectural-grade installation platform that brings a modern and unique tension wire installation without requiring complicated and custom-engineered architectural rigging. Install Dimension Stele Boxcore in any open space, at any height – all you need is a floor and ceiling as anchor points. The finished installation features the board suspended in midair on a simple tensioned wire rope (1x19 SSAC) assembly – with all the parts in the box from Egan.
Order one kit per board to be installed. A Standing Rigging Kit includes hardware suitable for installing one board (of any standard size) with a floor-to-ceiling distance of up to 12’. For greater heights, contact Customer Service to specify longer wire. For long continuous runs of boards, it may be possible for two boards to share one tension wire – please call Customer Service.
A modern, professional grade markerboard with a 1 1/8” (29mm) deep and can be specified in standard white or clear anodized aluminum.
A low-iron tempered safety glass (PPG Starphire® and Pilkington OptiWhite®) glass markerboard with a 3/4” (19mm) frame
What’s in the Box
The kit consists of track, wire, board mounts (stops and eye bolts) and termination hardware. What is not included: installation hardware (to mount the track), tools, and the tension gauge. Wire tension of 350lbs is recommended to stabilize the installation, and a wire tension gauge is required to measure this. If cutting the wire, the cut must be clean. If the installer does not have a tension gauge or wire cutter (appropriate for SSAC 1x19, such as Felco cutter), these are widely available and also available from Egan.